Lash Bed
A lash set keeps the client on the bed for two hours or more, so the shape of the bed is the whole job.
Every deck here is contoured rather than flat, and 73 to 80 cm wide, so the arms rest inside the bed instead of hanging off the sides. Arms with nowhere to go means a client who shifts, and a client who shifts means you stop.
Two things decide which bed. Whether the base raises and lowers, and whether the top section lifts so the client can sit up without getting off.
The range
The models on this page
Removable head and neck pillows
Smooth top, no stitching, the deepest curve
Ribbed quilting, one continuous S curve
Hydraulic, 175 cm, top section lifts
Fixed, 175 cm, top section lifts
Hydraulic, 190 cm, one piece
Fixed, 190 cm, one piece, the lightest
Narrow it down
Pick by the base
The base decides three things: the price, the weight, and whether the bed moves at all.
Settle the base first and there are only two or three left to compare.
Moulded platform
One shaped piece of plywood wrapped in leather. No moving parts, so there is nothing to service and nothing to leak.
190 by 80 cm, 70 cm high, rated to 200 kg, the highest here. It is also the heaviest at 60 kg.
Pick this when the bed stays where you put it.
Hydraulic pump
A foot pump raises and lowers the bed, so the bed comes to you instead of you adjusting the stool.
That means you stay at the height your back likes and the bed rises to your hands. Over a two-hour set, that is where the difference shows.
Gold-coated iron frame, 20 cm contoured mattress, and a neck pillow in the box.
The B in UR-L001B and UR-L002B is the adjustable top section. It lifts, so the client can sit up at the end of the set without getting off the bed. The A versions stay in one piece.
The A versions are also 190 cm and the B versions 175 cm. If the room will not take 190, that decides it for you.
Side by side
Every figure, side by side
Every figure below comes off the model’s own spec sheet. Scroll sideways on a phone.
| Model | Deck (cm) | Base | Rated load | Net weight | Mattress | Frame | Colours | Also | Manual |
|---|---|---|---|---|---|---|---|---|---|
| UR-L010 | 190 × 80 | Moulded platform | 200 kg | 60 kg | Integrated, moulded to the deck | Plywood wrapped in leather | Pink | Ribbed quilting, one continuous S curve | — |
| UR-L011 | 190 × 80 | Moulded platform | 200 kg | 60 kg | Integrated, moulded to the deck | Plywood wrapped in leather | Green | Smooth top, no stitching, deepest curve | — |
| UR-L012 | 190 × 80 | Moulded platform | 200 kg | 60 kg | Integrated, moulded to the deck | Plywood wrapped in leather | Tea green | Removable head and neck pillows | — |
| UR-L001A | 190 × 73 | Fixed frame | 150 kg | 42 kg | 20 cm contoured | Iron frame | Light gold | 190 cm, one piece, the lightest here | |
| UR-L001B | 175 × 73 | Fixed frame | 150 kg | 42 kg | 20 cm contoured | Gold-coated iron | Black / Dark brown / Brown / Blue / Pink / White | 175 cm, top section lifts | |
| UR-L002A | 190 × 73 | Hydraulic pump | 150 kg | 45 kg | 20 cm contoured | Gold-coated iron | Black / Dark brown / Brown / Blue / Pink / White | 190 cm, one piece, foot pump | |
| UR-L002B | 175 × 73 | Hydraulic pump | 150 kg | 42 kg | 20 cm contoured | Gold-coated iron | Black / Dark brown / Brown / Grey / Pink / White | 175 cm, top section lifts, foot pump |
UR-L010, L011 and L012 share one platform. Deck, height and rating are identical. What differs is the top: L010 is quilted in fine vertical ribs, L011 is completely smooth with the deepest curve, and L012 comes with removable head and neck pillows.
All four iron-frame models include a neck pillow.
The same across the range
Materials and
tech specs
The table above is what changes model to model. This is what does not.
Surfaces
What the client lies on
- Upholstery
- 2.0 mm waterproof PU leather, anti-oil and easy to disinfect, in more than 50 colours
- Filling
- High-density foam, contoured to the deck
Structure
What carries the load
- Frame
- Plywood wrapped in leather, or gold-coated iron
- Rated load
- 150 kg on the iron frames, 200 kg on the moulded platforms
- Net weight
- 42 to 60 kg, so one person can place it
Paperwork and parts
What comes with it
- Certificates
- ISO 9001 on the quality system, CERTIPUR-US on the foam
- Customisation
- 50+ colours, logo embossing, size changes
- Packaging
- Flat-pack, sized for efficient global shipping
Your colour
Pick the colour
from our swatch books
There are no stock colours. Every cover is cut here to order, in leather or velvet, in the colour you pick from the swatch book.
- Leather and velvet each have their own swatch book
- Your own colour is matched against the roll before anything is cut
- Logo embossing goes on the same order, with no separate charge line
- A physical swatch goes out before you sign off the sample
Inside the factory
The curve is cut here,
not bought in
A lash bed is one long curve, and it only stays comfortable if the frame, the foam and the cover are cut to the same pattern.
- Plywood shaped in our own carpentry shop
- Iron frames welded, polished and gold coated in house
- Brackets fixed and every bed put together on our own floor
- Wrapped and boxed here before it leaves
On file
The three certificates,
word for word
Reproduced as issued. Ask for the PDFs with your enquiry.
Verification no. MK26060093P01-E01, issued 30 July 2026 by TMC Testing Services (Shenzhen). EMC Directive 2014/30/EU, tested to EN IEC 55014-1, EN IEC 55014-2, EN IEC 61000-3-2 and EN 61000-3-3. Holder: Shenzhen Union-win Technology Co., Ltd. Covers 14 electric beauty bed models, UR-B18 and UR-W18 series.
Verification no. MK26060093P01-C02, issued 30 July 2026 by TMC Testing Services (Shenzhen). Directive 2011/65/EU as amended by (EU) 2015/863, tested to the IEC 62321 series. Same 14 models as the EMC verification.
Test report no. MK26060093P01-C01, dated 30 July 2026, by TMC Testing Services (Shenzhen). 253 substances of very high concern on the ECHA list tested, results within the limits of Regulation (EC) No 1907/2006. Same 14 models.
Who orders these
Who buys lash beds
The bed is the same. What changes is the quantity, the paperwork, and what we hold for you.
Lash artist working alone
One bed, one colour, and a shape the client will sit still on for two hours. Net weight is 42 to 60 kg, so it goes up a stairwell.
Start with one bed.
Lash and brow studio
Three or four beds in one room, all the same colour, plus stools and trolleys that match.
Ask us to hold the colour so the second batch matches the first.
Distributor or training school
An assembly PDF you can hand a buyer, and a bed that ships flat.
Models can be mixed in one order.
How to order
Three ways in
The bed is the same. What changes is the quantity and the paperwork.
Sample
One bed in the studio first
- MOQ
- 1 piece
- You get
- A 3D render in your colour, then one bed to work on
- Why
- The curve is easier to judge with a client on it than in a photo
Wholesale
Order for stock
- MOQ
- 5 to 10 pieces depending on the model, and models can be mixed in one order
- Lead time
- 15 to 30 working days after sign-off
- Included
- Your colour, logo embossing, the assembly PDF, flat-pack cartons and a loading plan
OEM and ODM
Build your own bed
- Scope
- Deck length and width, the curve itself, frame, cover and packaging
- Process
- Drawing, 3D render, sample sign-off, production
Timeline
What happens after
you send the form
Six steps. Everything before production is measured in days; only the run itself takes weeks.
Enquiry
Which models, how many, and the destination port.
Quote
Back within 24 hours, with the certificate set for your market.
3D render
The bed in your colour, with your logo, before a roll is cut.
Sample
One bed for sign-off.
Production
15 to 30 working days after sign-off.
Loading
Flat-packed, documented, container booked on your terms.
Packed and loaded
Flat-packed
on purpose
These beds ship flat, which is why a studio can order four without paying freight on four beds worth of air.
Reinforced wooden crates for the large items, heavy-duty cardboard for the rest. Our own team handles the paperwork from customs documents to final port delivery, on FOB, CIF or the terms you already work with.
After it arrives
What is covered,
and for how long
Hassle-free support
In the first 30 days after delivery, a quality issue is answered with a replacement or a fix, not a claims process.
Damage replacement
Free replacement or parts for functional or structural damage inside the first 90 days. This is what covers transit damage that only shows once it is in use.
Manufacturer warranty
Structure and manufacturing defects: motors, remote controllers and lifting systems, hydraulic systems, and the metal or wooden frame. Sewing workmanship and upholstery defects are covered for 30 days from delivery. After the year, spare parts and technical support stay available.
Wrinkling of vinyl on a seating surface is normal wear, not a defect. Every upholstered chair shows it with use. What is not covered is listed in full on the warranty policy page.
Design and 3D planning
Custom design consultation and a 3D plan of the room before anything is cut.
Updates and checkpoints
Progress updates and quality checkpoints while the order is on the line.
Parts and repair
Technical support around the clock, spare parts and repair services after delivery.
Questions
What buyers ask
about lash beds
Moulded platform or iron frame?
The moulded models are one shaped piece of plywood wrapped in leather. Nothing moves, nothing needs servicing, they are 80 cm wide and rated to 200 kg. The iron-frame models are narrower at 73 cm, lighter at 42 to 45 kg, and some of them raise and lower on a hydraulic pump.
What does the B mean in UR-L001B and UR-L002B?
The B is the adjustable top section. It lifts, so the client can sit up at the end of the set without getting off the bed. The A versions stay in one piece.
The A versions are 190 cm and the B versions 175 cm, so choosing between them settles two things at once: how much floor the bed takes, and whether the client needs a hand getting up.
Is a neck pillow included?
The four iron-frame models include a neck pillow. The UR-L012 comes with removable head and neck pillows. The L010 and L011 have a moulded deck and no separate pillows.
How many colours can I have?
There are no stock colours. Covers come in leather or velvet, and you pick the colour from our swatch books. The moulded models each come in their own colour.
Your colour costs no more and adds no time, because we cut the cover here. A physical swatch goes out before you sign off the sample.
What is the minimum order?
5 to 10 pieces on most models, and models can be mixed in one order. You can order a single sample first.
Is there an assembly manual?
The four iron-frame models come with an assembly PDF, linked in the last column of the comparison table. The moulded models arrive as one piece and need no assembly.
Next step
Send the models,
the quantity and the port
Send those three and a quote comes back within 24 hours, with the certificate set for your market attached. Mixed models in one order are fine.