Home  ›  Chair  ›  Salon Stools

Salon Stools

This is the only thing in the shop your team touches all day and clients barely look at, so it gets judged differently: not on how it looks, but on how a day in it feels and how it cleans. The cylinder and the rating are the same across this page, three-stage and 100 kg. What differs is the job. Start with one question: is this stool for you, or for the client?

67 to 90 cmHeight range
100 kgRated load
3Cylinder stages
33 to 46 cmSeat width
Nail salon with UniRelax stools

Narrow it down

Pick by how you sit

The cylinder and the rating are identical across the four. What differs is the posture.

01

Standing mostly, sitting sometimes

Standing at the chair, sitting now and then. In that posture a backrest goes unused, and what matters is how fast it cleans. The UR-C009 has the seat and the back moulded as one curved shell with no join between them. No join means nothing for hair or product to collect in. On a barbershop or salon floor, that is time back every day.

02

Sitting most of the day

Sitting for most of the day. Here a backrest is not optional, and where it sits matters. The UR-C008 has a ribbed oval backrest on its own arm, separate from the seat. Because it is separate, you can set it where your back actually is. Everyone’s back is in a different place, which is why a fixed backrest is wrong for most people.

03

Leaning over a bed

Facials, lashes and permanent makeup are done leaning over a bed, and there it is height that matters. The UR-C007 rises to 85 cm, the tallest stool we make, so you sit above the deck instead of reaching up to it and your wrists stay down. The seat is round and only 33 cm, so turning is not restricted, and the backrest is small on a chrome bracket: enough to lean on, not enough to stop you.

04

For the client

Nail and lash clients sit for one to two hours, and this one is not for you. The UR-C005 has a backrest that wraps around in a petal shape over a 46 cm round seat, at a seat height of 79 to 90 cm, which lines up with a manicure table. PVC or velvet, and the velvet version is the one that photographs.

Side by side

Every figure, side by side

Scroll sideways on a phone.

ModelHeightSeatBackrestBaseCoverLoadWhat else
UR-C00967 to 81 cm43 × 38 × 7 cmOne piece with the seat46 × 46 cm, five-star on castorsPVC100 kgNo join to clean
UR-C008——40 × 21 cm, on its own arm46 × 46 cm, five-star on castorsPVC100 kgBackrest positionable
UR-C00770 to 85 cm33 × 33 × 7 cm38 × 18 × 24 cm58 × 58 cm, five-star on castorsPVC100 kgThe tallest here
UR-C00579 to 90 cm46 × 42 × 6 cm48 × 33 cm, petal46 × 46 cm, five-star on castorsPVC or velvet100 kgFor the client

The UR-C008 cells are left empty rather than filled in: its measured height and seat figures are being re-taken off the physical stool, because the shape is not the same as the UR-C009 and the two should not carry the same numbers.

The same across the range

Materials and
tech specs

The table above is what changes model to model. This is what does not.

Surfaces

What you sit on

Upholstery
PVC leather, or velvet on the UR-C005
Filling
High density foam

Structure

What carries the load

Cylinder
Three-stage gas lift
Base
Five-star plated metal on twin-wheel castors
Rated load
100 kg

Paperwork and parts

What comes with it

Certificates
ISO 9001:2015 on the quality system
Customisation
Colour, logo and cover material
Minimum order
5 to 10 pieces depending on the model, and models can be mixed in one order
Lead time
15 to 30 working days from sample approval

Under the seat

The gas lift is the part that fails first

A stool is four components and the cheap ones fail in the same order: the cylinder sinks, the castors clog with hair, the foam flattens, the base rusts. These are what is fitted here.

Class 4 pneumatic gas cylinder used in salon stools
Gas lift

Class 4 pneumatic cylinder, the top grade. Thicker walls and heavy-duty seals, so it does not leak air and sink under the stylist. Rated to 160 kg dynamic load.

Polyurethane castors with sealed bearings
Castors

Polyurethane rollerblade castors on sealed bearings. The smooth face does not let hair wind around the axle, and it rolls on wood or tile without scratching.

High density cold-cure foam used in stool seats
Seat

High density cold-cure foam, which keeps its rebound rather than bottoming out after a year of eight-hour days.

Polished aluminium alloy stool base
Base

Polished aluminium alloy rather than chromed steel. Lighter to scoot, and it does not rust in a room that is wet most of the day.

Your colour

Pink and cream are stock,
the rest is a roll

Pink and cream are stock, chosen to match the rooms nail and lash studios actually paint, and they are hard to find elsewhere. Anything else costs no more and adds no time.

  • Stock colours ship on the standard 15 to 30 day timeline, with no surcharge
  • Your own colour is matched against the roll before anything is cut
  • Velvet is available on the UR-C005
  • A physical swatch goes out before you sign off the sample
Upholstery leather at the UniRelax factory

Inside the factory

The castor is what
fails first

On a salon stool the first thing to fail is not the cylinder, it is the castor. Hair winds into the axle, the wheel stops turning, and the next person who pushes off twists the seat. So the two things we watch on this range are the castor and the cylinder. All four run on a five-star plated base with twin-wheel castors, and a three-stage cylinder that holds its travel.

  • Bases plated and assembled in house
  • Shells moulded to one profile, seat and back in one piece on the UR-C009
  • Foam cut from block to the seat profile
  • Covers cut to pattern and sewn on our own machines
2,000 m²Floor area
100People
20,000Pieces a year
2021Established
Metal being cut at the UniRelax factory
Cutting
Plated parts being polished at the UniRelax factory
Polishing
Foam being cut at the UniRelax factory
Foam
Covers being sewn at the UniRelax factory
Sewing

On file

The certificates,
word for word

Reproduced as issued. Ask for the PDFs with your enquiry.

ISO 9001:2015 quality management system certificate
ISO 9001:2015

Quality management system, GB/T19001-2016 / ISO 9001:2015. Holder: Union Win Industrial (China) Co., Ltd. Registration no. 064-21-Q-2073-R0-M, issued by Beijing Standard Certification Centre under CNAS C064-M.

CertiPUR-US certificate for viscoelastic memory foam
CertiPUR-US

Issued by the Alliance for Flexible Polyurethane Foam for viscoelastic (memory) foam, lab report T0001128339/10AZ 591313. Covers content, emissions and durability testing on the foam family, not on the finished piece.

BSCI social compliance audit report
BSCI

Amfori BSCI social compliance audit of the factory: working hours, wages, health and safety and management practice. It is an audit of the building the furniture is made in, not a product test.

Who orders these

Who buys stools

The stool is the same. What changes is the quantity and the colour you match it to.

One shop

Fitting out a room

One or two, in the same colour as the chairs. Stools are the piece people forget, and a stool in the wrong colour is what makes a room stop reading as a set.

Order them with the chairs so the leather comes off one roll.

Multi-chair

Every station needs one

One per station, ordered together. Mixing models is normal, because the work is not the same: a shell stool for cutting, a tall one for facials.

Mixed models ship on one lead time.

Resale

Distributor

Stock that moves: light, flat-packed, and small enough to ship by parcel.

Ask about cylinder and castor kits alongside the first order. Those two are the consumables.

How to order

Three ways in

You can mix models inside one order. What changes is the quantity and the timeline.

Sample

Try one before you commit

MOQ
1 piece
You get
A 3D render first, then one unit in your colour and logo
Lead time
Confirmed once we have your spec

Wholesale

Order for stock

MOQ
5 to 10 pieces depending on the model, and models can be mixed in one order
Lead time
15 to 30 working days after sign-off
Included
Your colour, your logo, export cartons and a loading plan

OEM and ODM

Build your own model

Scope
Your dimensions, your structure, your upholstery, your packaging
Process
Drawing, 3D render, sample sign-off, production

Timeline

What happens after
you send the form

Six steps. Everything before production is measured in days; only the run itself takes weeks.

Step 01

Enquiry

Which models, how many, and the destination port.

Step 02

Quote

Back within 24 hours, with the certificate set for your market.

Step 03

3D render

The stool in your colour, with your logo, before a roll is cut.

Step 04

Sample

One unit for sign-off.

Step 05

Production

15 to 30 working days after sign-off.

Step 06

Loading

Boxed, documented, container booked on your terms.

Packed and loaded

Flat-packed,
assembled in a minute

The seat, the cylinder and the base ship separately and push together on arrival, with no tools. A lot fit in a container, so the freight per stool is low.

Stools being packed for export at the UniRelax factory
Packing in progress. Seat, cylinder and base are boxed separately.
Packed cartons in the UniRelax warehouse
Our own warehouse. Orders are staged and counted here before the container is called.

After it arrives

What is covered,
and for how long

30Day

Hassle-free support

In the first 30 days after delivery, a quality issue is answered with a replacement or a fix, not a claims process.

90Day

Damage replacement

Free replacement or parts for functional or structural damage inside the first 90 days. This is what covers transit damage that only shows once it is in use.

1Year

Manufacturer warranty

Structure and manufacturing defects: motors, remote controllers and lifting systems, hydraulic systems, and the metal or wooden frame. Sewing workmanship and upholstery defects are covered for 30 days from delivery. After the year, spare parts and technical support stay available.

Wrinkling of vinyl on a seating surface is normal wear, not a defect. Every upholstered chair shows it with use. What is not covered is listed in full on the warranty policy page.

Questions

Before you send
the enquiry

Which stool for which job?

Standing mostly: the UR-C009, moulded as one shell with no join for hair to collect in. Sitting mostly: the UR-C008, with a backrest you can position. Leaning over a bed: the UR-C007, which rises to 85 cm. For the client: the UR-C005, with a petal back at manicure table height.

Why is the UR-C007 so much taller?

Because it is not used at a chair, it is used at a bed. Working over a treatment bed you need to sit above the deck, not beside it, or your wrists stay raised all day. 85 cm is what that takes.

What is the difference between the UR-C009 and the UR-C008?

The UR-C009 has the seat and the back moulded as one shell. The UR-C008 has a separate ribbed oval backrest on its own arm, which can be positioned where your back is.

What castors do they run on?

A five-star plated base with twin-wheel castors on all four. The castor is the part that fails first on a salon stool, so ask for a castor kit with the first order if you are buying for stock.

What is the minimum order?

5 to 10 pieces on most models, and models can be mixed in one order. Stools are usually ordered alongside chairs, and they ship on the same lead time.

Can I have velvet?

On the UR-C005, yes. The others are PVC leather. Velvet photographs very differently from how it looks in the room, so ask for a physical swatch before you sign off.

Next step

Send the models,
the quantity and the port

A quote comes back within 24 hours. Stools ship on the same lead time as the chairs, so order them together.